توان تجهیز دنا، تامین کننده ابزار دقیق و تجهیزات نفت، گاز و پتروشیمی
توان تجهیز دنا، تامین کننده ابزار دقیق و تجهیزات نفت، گاز و پتروشیمی
Part number: MSA Ultima X5000
Origin: Usa
توان تجهیز دنا
|
Product Specifications
|
|||
| COMBUSTIBLE GAS SENSOR TYPE | Catalytic Bead (XCell combustible) Infrared (XIR Plus) | ||
| TOXIC GAS & OXYGEN SENSOR TYPE | XIR PLUS | Carbon Dioxide (CO2) | |
| XCell Toxic | Ammonia (NH3), Carbon Monoxide (CO), Carbon Monoxide (CO) H2-resistant, Hydrogen Sulfide (H2S), Chlorine (Cl2), Chlorine Dioxide (ClO2 ) Sulfur Dioxide (SO2) | ||
| XCell O2 | Oxygen (O2) | ||
| Electrochem. | Ammonia (NH3), Ethylene Oxide (ETO) Hydrogen (H2), Hydrogen Chloride (HCl), Hydrogen Cyanide (HCN), Hydrogen Fluoride (HF) Nitric Oxide (NO), Nitrogen Dioxide (NO2), Sulfur Dioxide (SO2) | ||
| SENSOR MEASURING RANGES | Combustible | 0-100% LEL | |
| CO2 | 0-2%, 0-5% Vol | ||
| CO | 0-100, 0-500, 0-1000 ppm | ||
| CO, H2-resistant | 0-100 ppm | ||
| Cl2 | 0-5, 0-10, 0-20 ppm | ||
| ClO2 | 0-3 ppm | ||
| ETO | 0-10 ppm | ||
| H2 | 0-1000 ppm | ||
| HCl | 0-50 ppm | ||
| HCN | 0-50 ppm | ||
| HF | 0-10 ppm | ||
| H2S | 0-10, 0-50, 0-100, 0-500 ppm | ||
| NH3 | 0-100, 0-1000 ppm | ||
| NO | 0-100 ppm | ||
| NO2 | 0-10 ppm | ||
| O2 | 0-25% | ||
| SO2 | 0-25, 0-100 ppm | ||
| APPROVALS | Markings vary by component. | ||
| CLASSIFICATION | See manual for specific component markings. | ||
| DIVISIONS (US/CAN) | Class I, II, III; Div 1 & 2, T4/T5/T6 | ||
| ZONES (GLOBAL) | Ex db nA IIC T5 Gb (Class I, Zone 1/Zone2) Ex tb IIIC T85°C Db (Class II, Zone 21) |
||
| ENCLOSURE RATING | Type 4X, IP66 | ||
| WARRANTY | X5000 transmitter | 2 years | |
| XIR PLUS | 10 years source, 5 years electronics | ||
| XCell Sensors | 3 years | ||
| Electrochemical Sensors | Varies by gas | ||
| APPROVALS | CSA, FM*, ATEX, IECEx, INMETRO, DNV-GL Marine, CE Marking. SIL 2 suitable. Complies with C22.2 No. 152, FM 6320 |
||
|
Environmental Specifications
|
|||
| OPERATING TEMPERATURE RANGE | XCell | -40°C to +60°C | |
| Electrochem. | See page 2 | ||
| XIR PLUS | -40°C to +60°C | ||
| RELATIVE HUMIDITY (NON-CONDENSING) | XCell toxics & O2 | 10-95% | |
| XCell combustible | 0-95% | ||
| XIR PLUS | 15-95% | ||
|
Mechanical Specifications
|
|||
| INPUT POWER | 11 to 30 VDC, 3 wire | ||
| SIGNAL OUTPUT | Dual 4-20 mA current source, HART | ||
| BLUETOOTH (OPTIONAL) | Bluetooth Low Energy (BLE) v4.3 or higher | ||
| RELAY RATINGS | 5 A @ 30 VDC; 5 A @ 220 VAC (3X) SPDT – fault, warn, alarm |
||
| RELAY MODES | Common, discrete, horn | ||
| NORMAL MAX POWER | Without Relays | With Relays | |
| XIR PLUS | 5.7 W | 6.7 W | |
| XCell combustible | 3.9 W | 4.9 W | |
| XCell Toxic & O2 | 1.8 W | 2.8 W | |
| XIR PLUS & XCell combustible | 9.9 W | 10.9 W | |
| XIR PLUS & XCell toxic or O2 | 6.0 W | 7.0 W | |
| Dual XIR PLUS | 10.6 W | 11.6 W | |
| Dual XCell toxic & O2 | 2.6 W | 3.6 W | |
| Dual XCell combustible | 9.6 W | 10.6 W | |
| Dual XCell comb. & XCell toxic or O2 | 4.3 W | 5.3 W | |
| EMC DIRECTIVE | Complies with EN 50270, EN 61000-6-4, EN 61000-6-3 | ||
| DISPLAY | Organic LED (multi-lingual) with contrast ratio of 2000:1 and view angle of 160° | ||
| HART | HART 7, HART device description language available | ||
| FAULTS MONITORED | Low supply voltage, RAM checksum error, flash checksum error, EEPROM error, internal circuit error, relay, invalid sensor configuration, sensor faults, general system | ||
| CABLE REQUIREMENTS | 3-wire shielded cable for single sensor and 4-wire shielded cable for dual sensor configurations. Accommodates up to 12 AWG or 4 mm2 Refer to manual for mounting distances. |
||
|
Dimensions
|
|||
| HOUSING (W x H) | 5.88″ x 5.71″ (150 x 145 mm) | ||
| W/XCELL SENSOR | 5.88″ x 10.15″ (150 x 258 mm) | ||
| W/XCELL & XIR SENSORS | 13.42″ x 10.15″ (341 x 258 mm) | ||
| LID (DEPTH) | W/RELAY BOARD | 4.86″ (123 mm) | |
| W/O RELAY BOARD | 3.86″ (98 mm) | ||
| WEIGHT | 8.8 lb. (4 kg), 316 SS | ||
لطفا فرم زیر را تکمیل نمایید.
استعلام محصول
